In daily life, what we call the chassis mostly refers to the mainframe of the computer. A good chassis structure is very important for the mainframe of the computer. With the improvement of technology and the progress of living standard, people have put forward higher requirements for the appearance and structure of the chassis. Jinan chassis and cabinet manufacturer briefly describes the requirements of modern cabinet structure design.

1、贯彻尺度化、模块化：尺度化是我国的一项紧凑技术经济政策和治理措施，它对于提高产品质量和出产率、便于使用维修、增强企业治理、降低出产本钱等都具有紧张作用，结构设计中必需尽量削减特别零、部件的数目，增长通用件的数目，尽可能多的采用尺度化、规格化的零、部件和尺寸系列。

1. Carry out standardization and Modularization: standardization is a compact technical and economic policy and governance measure in China. It plays an important role in improving product quality and production rate, facilitating use and maintenance, enhancing enterprise governance, and reducing production cost. In structural design, it is necessary to reduce the number of special parts and components, increase the number of general parts, and adopt scale as much as possible Standardized parts, components and size series.

2、优良的结构工艺性：结构与工艺是紧密亲密相干的，采用不同的结构就响应有不同的工艺。而且机箱结构设计的质量必需要有优良的工艺措施来保证，因此在机箱结构设计中，就得要求设计者必需结合出产现实考虑其结构工艺性。

2. Excellent structure technology: structure and technology are closely related, different structures respond to different processes. Moreover, the quality of chassis structure design must be guaranteed by excellent process measures. Therefore, in the design of chassis structure, the designer must consider the structural process combining with the production reality.

3、设备的操纵使用与安装维修更便捷：为了能更好地操纵和使用设备，必需使机箱机柜的结构设计吻合人的生理特点。同时还要求产品的结构简朴，装拆利便。此外，面板上的控制器、看到的装置必需进行公道现配与布局，以及考虑工作职员的人身标题题目。

3. The operation, installation and maintenance of the equipment are more convenient: in order to operate and use the equipment better, it is necessary to make the structural design of the cabinet conform to human physiological characteristics. At the same time, it also requires simple structure and convenient assembly and disassembly. In addition, the controller on the panel and the devices seen must be reasonably configured and arranged, and the personal safety of the staff should be considered.
                           

4、机箱结构与外观相协调：跟着个性消费经济时代的到来，人们在购买产品时更加注重产品外观的形态美，产品外观设计的重要性日益突显，机箱结构设计需要考虑到机箱外观设计方面的要求，并在不影响产品功能的条件下尽可能配合机箱的外观设计，使机箱的内在与外在相协调统一。

4. Coordination of chassis structure and appearance: with the advent of the era of personalized consumer economy, people pay more attention to the appearance beauty of products when purchasing products, and the importance of product appearance design is increasingly prominent. The design of chassis structure needs to consider the requirements of chassis appearance design, and try to cooperate with the appearance design of chassis without affecting the product function, so as to make the inside of the chassis more convenient In harmony with the external unity.

此外，在设计机箱机柜时，还需要考虑机箱内部元件、机箱的零部件之间的电磁干扰和热的影响，进一步进步电机能的稳固性。需细致机箱的强度、钢度标题题目，以免产生变形，引起电气接触不良、门、插接件卡滞，甚受振后损坏。需按划定的工作环境和使用前提，采取相应的措施以进步设备的可靠性和使用寿命，保证产品技术参数符合行业要求。

In addition, in the design of the cabinet, the electromagnetic interference and thermal influence between the internal components and parts of the cabinet should be considered to further improve the stability of the motor. It is necessary to pay attention to the strength and steel title of the case, so as to avoid deformation, poor electrical contact, door, connector clamping, and even damage after vibration. In order to improve the reliability and service life of the equipment and ensure that the technical parameters of the product meet the requirements of the industry, corresponding measures should be taken according to the designated working environment and use premise.