CK series low-voltage drawer type distribution cabinet is applicable to the low-voltage distribution system with AC 50Hz and rated working voltage of 380v-660v. It is used for power receiving, feeding, bus coupler, lighting, motor control and power compensation. It includes the functions of power center (PC) and motor control center (MCC), which meet the needs of industrial and mining enterprises, high-rise buildings, airports For power supply and distribution and power control in hospitals. This low-voltage drawer type distribution cabinet has novel and compact structure, reasonable layout, reliable operation, convenient maintenance, stable operation and other good performance.

使用环境条件

Service environmental conditions

1、周围空气温度：上限+40℃，下限-10℃。

1. Ambient air temperature: upper limit + 40 ℃, lower limit - 10 ℃.

2、海拔：≤2000m（若超过海拔2000m订货时应说明）。

2. Altitude: ≤ 2000m (if it exceeds 2000m, it shall be explained when ordering).

3、周围相对湿度：日平均值≤95%，月平均值≤90%。

3. Ambient relative humidity: daily average ≤ 95%, monthly average ≤ 90%.

4、周围空气：没有明显的尘埃、烟、腐蚀性或可燃性气体、水蒸气或盐的污染。

4. Surrounding air: no obvious dust, smoke, corrosive or combustible gas, water vapor or salt pollution.

5、无经常性剧烈震动或常年腐蚀场所。

5. There is no place with frequent violent vibration or perennial corrosion.

结构特点

Structural features

GCK框架采用压筋(模数E=25mm)组装而成,框架全部构件都经过镀锌处理,零部件的组装全部用自攻锁紧螺钉或高强度六角螺钉紧固,各个零部件的尺寸均实行模数化,从而保证了各零件的通用性、互换性、再按需要加上门、档板、隔板、抽屉、安装梁等零件，组装成品后有美观、牢固、质量好等优点。柜体分成母线室、功能单元室、电缆室三个相互隔离区间，可防止事故扩散和便于带电维修。

The GCK frame is assembled with compression bars (modulus E = 25mm), all components of the frame are galvanized, all parts are assembled with self tapping locking screws or high-strength hexagon screws, and the dimensions of all parts are modular, so as to ensure the universality and interchangeability of all parts, and then add door, baffle, partition, drawer, mounting beam and other parts as needed, After assembling the finished product, it has the advantages of beauty, firmness and good quality. The cabinet is divided into three mutually isolated sections: bus room, functional unit room and cable room, which can prevent the spread of accidents and facilitate live maintenance.

功能单元（抽屉单元）

Functional unit (drawer unit)

1、抽屉层高的模数为200mm。分为1/2单元、1单元、1.5单元、2单元、3单元五个尺寸系列。单元回路额定电流630A

1. The module of drawer floor height is 200mm. It is divided into five size series: 1 / 2 unit, 1 unit, 1.5 unit, 2 unit and 3 unit. Rated current of unit circuit 630A

2、每台MCC柜多能安装9个一单元抽屉或18个1/2单元的抽屉。

2. Each MCC cabinet can be installed with 9 one unit drawers or 18 1 / 2 unit drawers at most.

3、隔室的门板由主开关的操作机构与抽屉进行机械连锁，主开关在合闸位置时，抽屉不能抽出。

3. The door panel of the compartment is mechanically interlocked with the drawer by the operating mechanism of the main switch. When the main switch is in the closing position, the drawer cannot be pulled out.

4、主开关的操作机构可用一把挂锁锁定在合闸或分闸位置，可地进行电器设备的维修。

4. The operating mechanism of the main switch can be locked in the closing or opening position with a padlock, which can safely carry out the maintenance of electrical equipment.

5、功能单元背面具有主电路进出机构，具有三位置功能，操作简单可靠。

5. The back of the functional unit is provided with a main circuit inlet and outlet mechanism, which has a three position function, and the operation is simple and reliable.

6、抽屉单元采用旋转式推进机构，具有三位置功能，操作简单可靠。

6. The drawer unit adopts rotary propulsion mechanism, which has three position function and simple and reliable operation.

7、抽屉隔室中采用新型一次进行线罩，抽屉抽出后使之隔室内不会触及垂直母线。

7. The drawer compartment adopts a new type of primary wire cover. After the drawer is pulled out, the compartment will not touch the vertical bus.