机箱机柜的材质怎么选择？_业内资讯_新闻中心-济南通宇恒成自动化工程有限公司

当前位置：首页- 新闻中心 > 业内资讯

新闻中心

热门产品

常见问题

新闻中心

机箱机柜的材质怎么选择？

发布时间：2021-02-11 来源：http://www.tongyuhengcheng.com/ 浏览量：

机箱机柜在材质选择上面有很多的选择，不同的材质会有不同的作用。机箱机柜产品外壳一般采用不锈钢冷钢板，机箱机柜所使用的这种材质外壳面板具有良好的强度以及良好的电磁隔离、接地、噪声隔离、通风散热等性能。像这类面板在受一些外面因素的影响：

There are many choices in the material selection of chassis and cabinet. Different materials will have different effects. Stainless steel cold steel plate is generally used as the shell of the cabinet. The shell panel of the cabinet has good strength, electromagnetic isolation, grounding, noise isolation, ventilation and heat dissipation. This kind of panel is affected by some external factors

1、机箱机柜使用的大气条件为空气清洁，相对湿度为20%-80%无凝露产生。

1. The atmospheric condition of cabinet is clean air, relative humidity is 20% - 80%, no condensation.

2、机箱机柜为户内安装，安装在周围空气清洁、无导电、无爆炸尘埃、无强烈振动和冲击的场所。

2. The cabinet is installed indoors in a place with clean surrounding air, no electric conduction, no explosion dust, no strong vibration and impact.
济南机箱机柜

3、机箱机柜所在的机房周围空气温度不高于＋55℃，而且在24h内的平均温度不超过＋35℃，周围空气温度下限为-15℃。

3. The ambient air temperature of the machine room where the cabinet is located is not higher than + 55 ℃, and the average temperature within 24 hours is not more than + 35 ℃, and the lower limit of ambient air temperature is - 15 ℃.

4、任何对机箱机柜在正常情况下操作使用是不会有危险的，一定不要违规操作机箱机柜产品。

4. It is not dangerous for any cabinet to operate under normal conditions. Do not operate cabinet products in violation of regulations.

机箱机柜在制作的时候一定要按照要求制作，从材质到设计上面我们公司都在精心精益的雕琢着，欢迎广大用户的咨询。

Chassis cabinet in the production must be made according to the requirements, from material to design, our company is elaborately and lean carving, welcome the majority of users' consultation.

上一篇：仿威图机柜发泡密封条的性能！

下一篇：不锈钢机箱机柜解决生锈的方法!

热门产品 / HOT PRODUCT

Blokset 5000 开关

UPS电源柜

电源柜

新闻 / NEWS RECOMMENDATIONS