机箱机柜指钣金加工设备(激光切割机、发泡机、数控冲床、折弯机等)加工的箱柜。机箱机柜的应用领域也是非常广泛。那么如何判断
济南机箱机柜的品质好不好？
Cabinet refers to the cabinet processed by sheet metal processing equipment (laser cutting machine, foaming machine, CNC punch, bending machine, etc.). The application field of chassis and cabinet is also very wide. So how to judge the quality of Jinan chassis and cabinet?
1.看钢板。钢板须很厚。用手指轻敲就能感觉到哪些厚，哪些薄。
1. Look at the steel plate. The steel plate must be very thick. You can feel which is thick and which is thin by tapping with your fingers.
2.看喷漆。一个合格的机箱机柜，所有的钢材都需要喷漆，而且喷漆一定要均匀，这样才能很好的防锈防尘。
2. Look at the painting. For a qualified case and cabinet, all steel should be painted evenly, so as to prevent rust and dust.
3.看架构布局。一般来说，有散热孔的挡板比较多。一些用来固定电缆的铁皮要包边，防止损坏电缆。侧壁风扇应安装在机柜的后壁，因为设备的后部产生大部分热量。
3. Look at the architecture layout. Generally speaking, there are more baffles with cooling holes. Some iron sheets used to fix cables shall be wrapped to prevent damage to cables. The side wall fan should be installed on the rear wall of the cabinet because the rear of the equipment generates most of the heat.
4.看配件。因为安装包括网线、电信线、电力线，所以需要购买粘扣带或者齿形带，才能有效的将线缆有序的固定在机柜内。如果机柜配有线缆管理模块，使线缆可以直接固定在垂直安装导轨上，则很好。
4. Look at the accessories. Because the installation includes network cable, telecommunication cable and power cable, it is necessary to purchase a buckle or toothed belt to effectively fix the cable in the cabinet orderly. If the cabinet is equipped with a cable management module, so that the cable can be directly fixed on the vertical installation rail, it is good.
5.看玻璃。玻璃须更厚。还要注意玻璃周围是否有裂纹。如果有裂缝，说明有隐患。还有，注意是否有猫腻。6.看功能:考虑的应该是性。
5. Look at the glass. The glass must be thicker. Also pay attention to whether there are cracks around the glass. If there are cracks, there are hidden dangers. Also, pay attention to whether there is any felicity. 6. Look at the function: the first consideration should be security.
7.看散热情况。估计您的设备会产生多少热量。一般来说，柜子顶上有两到四个风扇，风扇越多越好。还有一些螺丝、螺母等。用来固定车架，应该也够用了。不要因为以后的扩展造成配件不足的困扰。
7. Check the heat dissipation. Estimate how much heat your device will generate. Generally speaking, there are two or four fans on the top of the cabinet. The more fans, the better. There are also some screws, nuts, etc. It should be enough to fix the frame. Don't worry about insufficient parts due to future expansion.
The quality of the chassis and cabinet can be directly affected by the manufacturing process. The steel plate edge of the high-tech chassis will not have burrs, sharp edges, burrs, etc. Moreover, the exposed edges and corners are wrapped, which is not easy to scratch the hands of the installation personnel. Contact us if you need http://www.tongyuhengcheng.com Come on!
TEL:0531-69922480
EMAIL:jntyhc@163.com 
公司地址：济南市槐荫区经十西路3788号
备案号：鲁ICP备09028695号-3
鲁公网安备37010402441282号
首页
产品
电话
置顶