一、仿威图机柜的核心优势：细节之处见真章

1、 The core advantage of the imitation Weitu cabinet: see the real chapter for details

这种机柜的设计融合了实用性和耐用性，从外到内都体现着对设备保护的用心：

The design of this cabinet combines practicality and durability, reflecting the care for equipment protection from the outside to the inside:

1.外观与结构设计

1. Appearance and structural design

机柜的外壳采用厚度均匀的金属板材，表面经过静电喷涂处理，形成一层坚固的防护层，既能抵抗碰撞刮擦，又能有效防锈。柜门采用多道密封胶条设计，关闭时紧密贴合柜体，配合隐藏式的锁具，不仅能防止灰尘、湿气进入，还能在一定程度上隔绝噪音和电磁干扰。例如，在粉尘较多的工厂环境中，这种密封设计能让柜内设备减少 70% 以上的积灰，延长设备使用寿命。

The outer shell of the cabinet is made of metal sheet with uniform thickness, and the surface is treated with electrostatic spraying to form a strong protective layer, which can resist collision and scratching, and effectively prevent rust. The cabinet door is designed with multiple sealing strips, which tightly adhere to the cabinet when closed. Coupled with hidden locks, it not only prevents dust and moisture from entering, but also isolates noise and electromagnetic interference to a certain extent. For example, in factory environments with high levels of dust, this sealed design can reduce over 70% of dust accumulation in cabinet equipment and extend equipment lifespan.

2.内部空间规划

2. Internal space planning

打开柜门，会看到内部整齐排列的安装支架和横梁，这些支架采用标准化的孔位设计，可以灵活调节高度和间距，无论是大小不一的电源模块、交换机，还是复杂的线路排布，都能找到合适的安装位置。柜内还预留了充足的走线通道，让电源线、信号线能够有序穿过，避免杂乱缠绕导致的短路风险。某车间使用这种机柜后，设备安装时间比传统机柜节省了 40%，线路故障发生率下降了 60%。

Opening the cabinet door, you will see neatly arranged installation brackets and crossbeams inside. These brackets are designed with standardized hole positions, allowing for flexible adjustment of height and spacing. Whether it is power modules of different sizes, switches, or complex circuit layouts, suitable installation positions can be found. Adequate wiring channels are also reserved inside the cabinet to allow power and signal lines to pass through in an orderly manner, avoiding the risk of short circuits caused by disorderly entanglement. After using this type of cabinet in a certain workshop, the equipment installation time was saved by 40% compared to traditional cabinets, and the incidence of line failures decreased by 60%.

3.材料与工艺选择

3. Material and process selection

根据使用环境的不同，机柜材料分为冷轧钢板和不锈钢两种：冷轧钢板成本适中，适合干燥清洁的室内环境；不锈钢则具有更强的耐腐蚀性，在潮湿的地下室或沿海地区使用时，能有效抵御盐分和水汽的侵蚀。无论是哪种材料，都经过严格的折弯、焊接工艺，确保柜体结构稳固，承重能力可达 500 公斤以上，即使装满重型设备，也不会出现变形或倾斜。

According to different usage environments, cabinet materials are divided into two types: cold-rolled steel plate and stainless steel: cold-rolled steel plate has a moderate cost and is suitable for dry and clean indoor environments; Stainless steel has stronger corrosion resistance and can effectively resist the erosion of salt and water vapor when used in damp basements or coastal areas. Regardless of the material, it undergoes strict bending and welding processes to ensure the stability of the cabinet structure, with a load-bearing capacity of over 500 kilograms. Even when loaded with heavy equipment, it will not deform or tilt.

二、如何选择适合的仿威图机柜：按需匹配是关键

2、 How to choose a suitable imitation Weitu cabinet: on-demand matching is key

面对市场上种类繁多的机柜，根据实际需求选择才能物尽其用：

Faced with a wide variety of cabinets in the market, choosing according to actual needs can make the most of them:

1.尺寸选择

1. Size selection

测量需要安装的设备大小，包括设备的高度、宽度和深度，同时预留 20%-30% 的空间用于走线和散热。例如，存放一台标准 19 英寸的服务器，需要选择宽度为 600 毫米、深度为 800 毫米的机柜，高度则根据设备数量选择 22U、27U 等不同规格（1U 约等于 4.45 厘米）。

Firstly, measure the size of the equipment to be installed, including its height, width, and depth, while reserving 20% -30% of the space for wiring and heat dissipation. For example, to store a standard 19 inch server, a cabinet with a width of 600 millimeters and a depth of 800 millimeters needs to be selected, and different specifications such as 22U and 27U should be chosen based on the number of devices (1U is approximately 4.45 centimeters).

2.材料与防护等级

2. Materials and Protection Levels

如果设备安装在室内干燥环境，冷轧钢板材质的机柜足以满足需求；若在潮湿多水的环境（如地下室、浴室附近），则应选择不锈钢材质，并关注防护等级（IP 等级），例如 IP54 表示防尘防水，适合户外或潮湿场景，IP65 则能抵御强烈喷水，适合更严苛的环境。

If the equipment is installed in a dry indoor environment, a cabinet made of cold-rolled steel plate material is sufficient to meet the requirements; If it is in a damp and water rich environment (such as a basement or near a bathroom), stainless steel material should be selected, and attention should be paid to the protection level (IP level). For example, IP54 indicates dust and water resistance, suitable for outdoor or humid scenes, while IP65 can resist strong water spray and is suitable for more harsh environments.

3.附加功能需求

3. Additional functional requirements

根据设备散热需求，选择带风扇、散热孔或空调模块的机柜；如果需要远程监控柜内状态，可选择带有透明观察窗或预留传感器安装位的型号。此外，机柜的颜色也可根据环境搭配，常见的灰色、黑色能很好地融入工业或办公场景。

Select cabinets with fans, heat dissipation holes, or air conditioning modules based on the cooling requirements of the equipment; If remote monitoring of the status inside the cabinet is required, models with transparent observation windows or reserved sensor installation positions can be selected. In addition, the color of the cabinet can also be matched according to the environment, and common shades of gray and black can blend well into industrial or office scenes.

本文由山东仿威图机柜友情奉献.更多有关的知识请点击:http://www.tongyuhengcheng.com我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message