仿威图控制柜被广泛应用于发电厂、变电站、石油化工部门、厂矿企业、高层建筑等低压配电系统的动力、配电和电动机控制中心,电容补偿等的电能转换、分配与控制之用。那么
仿威图机柜应该如何维护保养清洗呢?下面由小编给大家介绍一下。
The imitation Rittal control cabinet is widely used for power conversion, distribution and control of low-voltage power distribution systems such as power plants, substations, petrochemical departments, factories and mining enterprises, high-rise buildings, etc. So how to maintain and clean the imitation Rittal cabinet? Let's introduce it to you.
仿威图机柜维护保养:
Maintenance of imitation Rittal cabinet:
1.控制柜出厂时柜体表面应采用酸洗磷化,静电喷塑烘烤加工而成。
1. When the control cabinet leaves the factory, the surface of the cabinet body shall be processed by acid pickling and phosphating, and electrostatic spraying and baking.
2.控制柜使用时应放置在干燥通风地点以便于塑粉干燥性不于脱落。
2. The control cabinet should be placed in a dry and ventilated place during use so that the dryness of plastic powder will not fall off.
3.控制柜可长期放置于潮湿空气中盐分较多的场合使用,但需每12个月擦拭机箱上的水珠,以便于机箱的耐久性。
3. The control cabinet can be used in places with more salt in humid air for a long time, but the water drops on the cabinet should be wiped every 1 to 2 months to ensure the durability of the cabinet.
仿威图机柜清洗:
Simulated Rittal cabinet cleaning:
1.清洗仿威图机柜之前前,先要断开电源再对其进行清理。如果在通电情况下对其进行清洗的话,很容易导致漏电、短路等情况。
1. Before cleaning the imitation Rittal cabinet, first disconnect the power supply and then clean it. If it is cleaned when it is powered on, it is easy to cause leakage and short circuit.
2.在清洗仿威图机柜的时候,要避免水分残留在配电柜里,如果发现有水分存在,应该用干燥的抹布擦拭干净,保证机柜在干燥情况下才能通电。
2. When cleaning the imitation Rittal cabinet, it is necessary to prevent moisture from remaining in the distribution cabinet. If moisture is found, it should be wiped clean with a dry rag to ensure that the cabinet can be powered on only when it is dry.
3.切记不能用有腐蚀性的化学物品去清洗控制柜,也应避免柜体与腐蚀性的液体或空气接触。如果碰到有腐蚀性的液体或空气,会导致控制柜外表被腐蚀生锈,影响到它的美观,也不利保养。
3. Remember not to use corrosive chemicals to clean the control cabinet, and avoid the cabinet body from contacting with corrosive liquid or air. If it comes into contact with corrosive liquid or air, it will lead to corrosion and rust on the surface of the control cabinet, affecting its beauty and maintenance.
Although the imitation Rittal cabinet itself is very durable, it needs regular maintenance and cleaning after a long time of use. Only in this way can the normal and safe operation of the equipment be guaranteed, the number of failures be reduced, and the service life of the control cabinet be effectively improved. The above is the relevant answer to the question. Come to our website if you need http://www.tongyuhengcheng.com consulting service